Bearing units
A bearing housing with a bearing forms a bearing unit that simply needs to be screwed on and mounted onto the shaft. We carry over 200 SKF, NTN, and SNR units for shafts ranging from 12 to 140 mm: flanged, mounted, and tension-type. Choose based on the mounting type and shaft diameter.
Bearing Housing Types
|
Type |
Designation |
Mounting |
Available |
|---|---|---|---|
|
Vertical |
UCP |
Base with two holes, mounting on a flat surface |
60+ |
|
Square flange |
UCF |
Square flange with four holes |
Part of the 136 flange series |
|
Oval flange |
UCFL |
Oval flange with two holes |
Part of the 136 flange series |
|
Tensioning |
– |
Sliding within the frame, for tensioning belts and straps |
6 |
Use the filter below to select the desired housing/unit design.
Bearing housings by shaft diameter
You can determine the shaft diameter from the model number: multiply the last two digits (starting from 04) by 5. UCP 204 is for a 20 mm shaft, UCP 206 for a 30 mm shaft. Enter the inner diameter in the filter.
Bearing housing or complete unit
The selection mostly consists of complete units: a housing with a built-in Y-type bearing. Separate bearings for these housings can be found in the Y-type Ball Bearings category.
Need help? We’re available on weekdays from 7:00 a.m. to 3:00 p.m. at +420 732 445 248 or podpora@wafarex.com.
Frequently Asked Questions
What is the difference between UCP, UCF, and UCFL?
They differ in their mounting: UCP is a vertical housing with a foot, UCF has a square flange with four holes, and UCFL has an oval flange with two.
How do I select a bearing housing based on the shaft diameter?
Multiply the last two digits of the part number by 5: UCP 206 is for a 30 mm shaft. Or enter the diameter into the filter.
What is a bearing unit?
A housing and a Y-type bearing in one, ready for mounting on a shaft.
- 1
- 2
- 3
- 4
- 1
- 2
- 3
- 4