0W-30 Oils
Engine oils labeled 0W-30 are low-viscosity, which means they remain highly fluid even at low temperatures, making it easier to start the engine in cold weather. Unlike 0W-20 oils, they offer slightly better protection at high operating temperatures, making them ideal for engines operating under heavier loads. This oil specification helps reduce friction, optimizes fuel economy, and provides more robust engine protection.
Thanks to their versatility and ability to meet strict emissions standards, 0W-30 oils are suitable for a wide range of modern vehicles, including those requiring higher viscosity at higher temperatures. Using 0W-30 motor oil can help extend engine life and ensure reliable performance under various operating conditions.
What 0W-30 engine oils do we offer?
We offer 0W-30 engine oil from FUCHS, for which we are an official distributor. In this category, you’ll find, for example, Titan GT1 LONGLIFE III 0W-30 in 1- and 5-liter containers, with ACEA C3 specifications and VW 504 00/507 00 approval. When selecting an engine oil, always follow the viscosity and standard or approval specified by the vehicle manufacturer.
What does the 0W-30 designation mean?
0W-30 is an engine oil viscosity grade according to the SAE J300 standard. The 0W designation indicates the oil’s properties at low temperatures. Oil in this grade must meet the requirements for cold start performance at −35 °C and pumpability at −40 °C.
The number 30 indicates the viscosity grade at higher operating temperatures. At 100 °C, the oil must have a kinematic viscosity between 9.3 and less than 12.5 mm²/s.
However, viscosity alone is not sufficient to select the right motor oil. The required specifications and approvals from the automaker are also crucial.
FUCHS Titan GT1 LONGLIFE III 0W-30 Motor Oil
Our product range includes FUCHS Titan GT1 LONGLIFE III 0W-30 engine oil, designed for modern passenger cars and light commercial vehicles, particularly those requiring VW 504 00/507 00 approval. The oil is intended for both standard and extended service intervals where permitted by the vehicle manufacturer. It is also suitable for compatible engines equipped with exhaust aftertreatment systems, provided it meets the manufacturer’s requirements.
Which 0W-30 engine oil package should you choose?
The 1-liter package is particularly practical for topping off engine oil between regular oil changes. The 5-liter package is suitable for regular oil changes, provided it matches the required engine fill volume.
You can find the exact amount of oil needed for an oil change in your vehicle’s owner’s manual. The fill volume may vary depending on the specific engine.
Other motor oils
If your vehicle requires a different viscosity, check out 5W-40 oil, 5W-30 oil, 0W-20 oil or the full range of FUCHS motor oils.
Not sure which oil to choose? We’re here to help on weekdays from 7:00 a.m. to 3:00 p.m. at +420 732 445 248 or podpora@wafarex.com.
Frequently Asked Questions
0W-30 or 5W-30 oil?
At operating temperature, both belong to the same 30 class. 0W oil passes the cold start test at −35 °C, while 5W oil passes at −30 °C. Use the viscosity specified in your vehicle’s owner’s manual.
What do the 0 and 30 in the oil rating mean?
0W is the cold start grade (tested at −35 °C), and 30 is the viscosity at 100 °C. Both numbers are based on the SAE J300 standard.
What size container of 0W-30 oil should I buy?
1 liter is sufficient for a top-off; for an oil change in a passenger car, a 5-liter container is needed; you can find the exact fill volume in the vehicle’s owner’s manual.
- 1
- 1