Lubricant HHS 2000 Spray 500ml Würth (0893 106)

Würth HHS 2000 is a semi-synthetic adhesive lubricating oil in a 500 ml spray can (0893 106), resistant to high pressure and temperatures from −25 to +180 °C, and up to +200 °C for short periods.

What is Würth HHS 2000 used for?

Würth recommends it for general lubrication and areas subject to high pressure loads: gearshift, throttle and clutch cables, Bowden cables, hinges and return levers.

Properties according to Würth

• The lubricating film does not break even under high pressure and dampens noise and vibrations.

• It penetrates well and lubricates even areas with tight tolerances, whilst providing protection against corrosion.

• Compatible with O-rings, X-rings and plastics, and does not damage painted surfaces.

• It resists splashing water, salt water and weak acids and alkalis.

• It contains no silicone, resins or acids.

• Operating temperature −25 to +180 °C, briefly up to +200 °C.

How to apply HHS 2000

First clean the areas to be lubricated thoroughly; Würth recommends using HHS Clean (0893 106 10) for this purpose. The lubricating film only works effectively on a clean surface. Shake the spray before use and spray directly onto the parts.

HHS 2000 or HHS 5000?

Würth HHS 5000, a low-viscosity oil with PTFE. You can find other spray lubricants in the Grease Sprays category.

Product packaging: 500ml spray