pressing and forming oil Wisura AK 3118 CF/1, 205L FUCHS

The product is replaced by RENOFORM AK 3099 CF/1.

Water immiscible oil with  evaporating component for single or combined processing processes such as deep drawing, profiling, rolling, stamping and pressing of thin sheets.

The oil is suitable for all metallic materials and is very effective in preventing the formation of cold welds or build-ups in high-speed automatic presses. Degreasing of the made tools, especially between processing steps, is often unnecessary. All products are easily and economically applied by felt pad, roller or spray and provide reliable temporary protection against corrosion.

WISURA AK 3118 CF/1 is used for molding and forming at an increased degree of difficulty. Areas where the oil is used - pressing of dynamoplechs and production of contacts of all kinds for the electrical industry, household appliances, in the cutlery industry as well as in the production of coolers.

Composition

Hydrocarbons, high pressure additives, surfactants

Characteristics

• Density at 15°C: 770 kg/m3

• Viscosity at 20°C: 2.0 mm2/s

• Flash point: >56 °C

• Color (ASTM): clear

Packaging: barrel 205L