gear oil Renolin CLP 68, 20L FUCHS

RENOLIN CLP series oils are the latest generation of industrial gear oils with high pressure load capacity (EP/AW properties) and extremely high compressive load capacity. They are gear oils with excellent de-emulsification properties that can be used in all closed gearboxes with forced circulation or spray lubrication.

RENOLIN CLP series oils provide exceptional wear protection. They exceed the requirements of the standard FZG A/8.3/90 load test as well as the more stringent FZG A/16.6/140 test (at double the speed - 16.6 m/s and increased oil sump temperature - 140°C).

RENOLIN CLP series oils provide excellent protection against micropitting (load grade "high" in both step and long-term tests) and excellent protection against rolling bearing wear. The wear rate under the severe conditions of the FAG FE8 test was extremely low (7.5 rpm, 80°C, 80 h, 80 kN). The latest additive technology guarantees excellent wear protection and superior corrosion protection (for materials containing steel and copper).

The RENOLIN CLP range of oils have good compatibility with elastomers, which are lubricated and protected against wear under static and dynamic stress. The use of RENOLIN CLP products increases component life, equipment reliability and productivity.

RENOLIN CLP oils meet and exceed the requirements of DIN 51517-3: CLP; ISO 6743-6 and ISO 12925-1: CKC, CKD; AGMA 9005/E02: EP. Approved by major gear manufacturers.

Benefits

• Excellent corrosion protection

• Low foaming, excellent air separation

• Excellent de-emulsification properties (water and liquids containing water are separated very quickly)

• High oxidation stability

• Extremely high compressive load and load capacity, excellent anti-wear properties

• Excellent bearing wear protection (under mixed friction conditions) - FE8

• High wear resistance, excellent wear protection - FZG

• Excellent protection against micropitting in step and long-term test

• High wear protection according to Brugger

• Excellent tolerance to elastomers (static and dynamic stress)

• Good compatibility with coatings

Use

RENOLIN CLP gear oils are particularly suitable for:

• for the lubrication of spur, bevel and planetary closed gears with forced circulation or splash lubrication, operating at temperatures up to 100°C (short term up to 120°C)

• For all applications where CLP oil is recommended by the gearbox manufacturer in accordance with DIN 51 517-3, these oils meet and in many cases exceed the new requirements of well-known gearbox and bearing manufacturers

• for gears that are subjected to high and shock loads, they can also be used for highly loaded, slow-running roller and ball bearings

These petroleum oil based products have been designed to provide high quality industrial gear oil formulations with the latest additive technology. They meet the requirements of the latest industry standards of well-known OEMs.

RENOLIN CLP Series oils are approved by Siemens Flender.

Specifications

RENOLIN CLP series oils meet and in many cases exceed the requirements of:

• DIN 51 517-3 (2011): CLP

• ISO 6743-6 and ISO 12925-1: CKC/CKD

• AGMA 9005/E02: EP

• AIST 224

• David Brown S1 53.101

Among others, RENOLIN CLP products are approved:

• Siemens / Flender, Bocholt, Germany, Flender BA 7300, table A

• Müller Weingarten AG, Germany, DT 55 005, 10/2003

Packaging: 20L